Q-See QSD2216 Manual de usuario descargar pdf (Pagina 25)

ALARM ENABLE: alarm trigger switch, can be set to off, N.C(normal closed) or N.O(normal open).

If users set it to off, the DVR will ignore the alarm input.

MOTION ENABLE: Motion alarm switch, can be set to ON or OFF. If set to off, the DVR will ignore

the motion alarm.

MOTION LEVEL: motion sensitivity level, if the figure in the picture is small, please set to high or

very high, default is normal.

BUZZER TIME: buzzer sound time when there is a sensor or motion alarm.

SENSE RECTIME: when a motion or sensor alarm is triggered, the recording time of DVR, default

is 10 seconds.

Notice: Users should press the schedule button after setting up the parameters to activate

the settings.

5.6.1 Motion Detection settings

1) When surveying nearby objects (2-10 meters)

When in daytime, please set motion detection sensitivity to Normal level; when in night,

please set to low.

2) When surveying objects in 50-100 meters area

The objects 50-100 meters away will be quite small on the screen. When in daytime, please

set motion detection sensitivity to high level.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 51 52

Sin comentarios

Q-See QSD2216 Manual de usuario Pagina 25