Q-See QSD42908 Net Manual de usuario descargar pdf (Pagina 48)

QSD42908C8 User’s Manual

Fig 5.16 Video signal loss handle setup

Step 4: Setup alarm schedule: You can setup a working schedule. The DVR will only

respond when the video loss occurs during the schedule.

Note: The 4 time periods can not be repeated. Please reboot DVR to make parameters

effective.

Step 5: Setup alarm policy: You can select one or more response solutions, including “On

Screen Warning”, “Audible Warning”, “Upload to Center” and “Trigger Alarm Output”. You can

use 【↑】【↓】and 【EDIT】key to enable or disable them. “×” is disabled and “” is enabled.

Step 6: Save alarm setup: After your setup, press “Confirm” button and return to

“Advanced setting” interface. Press “Confirm” button to save current camera parameters and

return to main menu.

Step 7: Save all cameras: If you want to setup other cameras, please repeat step2 to step 6.

In “Camera” menu, press “Confirm” key to save all cameras parameters. Press “Cancel” button or

【ESC】key to abort.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 100 101

Sin comentarios

Q-See QSD42908 Net Manual de usuario Pagina 48