Q-See QSC26416 Manual de usuario descargar pdf (Pagina 88)

User Manual for Commercial Series Net DVR

Page 88 Total 121

Phone: Only used when work mode is “PPP” and PPP mode is “Active”. It is the phone

number of remote PC.

Callback and Data Encryption: Only used when work mode is “PPP”. This option is not

currently available.

Confirm: Save parameters and return main menu.

Cancel: Abort modification and return main menu.

Example: PPP (Modem) passive dialup through PSTN

There are two Modems. One is connected to the DVR RS-232 port with DCE cable. The

other is connected with PC COM port.

Setup at DVR end

Step 1: RS232 setup: Setup baud rate, data bit, stop bit, parity and flow control. They must

be the same as those of modem connected with PC.

Step 2: Video setup In “Recording” menu, select the camera you want to transfer through

PSTN. If you set CIF resolution, we suggest you set frame rate as 1 FPS. If you set QCIF

resolution, the frame rate can be selected under 4FPS. You can adjust bit rate, resolution and frame

rate according to your needs.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 120 121

Sin comentarios

Q-See QSC26416 Manual de usuario Pagina 88