Q-See QT528 Manual de usuario descargar pdf (Pagina 12)

22 23

CHAPTER 4 MAIN MENU SETUP

MOTION

Motion Tab

As with the Alarm function above, it incorporates hold time and can trigger procedures.

Select which cameras you wish to start recording on motion detection. Set the holding time

which determines the length of time the cameras continue recording after motion stops.

To Record allows you to determine which cameras will begin recording. Cameras can

be set to record individually, in blocks, or all cameras can be activated.

To PTZ activates preset, cruise or track functions on selected Pan-Tilt-Zoom

cameras. Depending on your model of PTZ camera, one of up to 128 pre-set actions

can be engaged. Check your camera’s manual for details.

Schedule Tab

Set by default to always on, the schedule can be altered in the same manner as that used in

Schedule in SECTION 4.4.

PICTURE 4-27

PICTURE 4-28

PICTURE 4-29

Under the Trigger setting, you can indicate

which other cameras begin recording when

motion is detected. For example, if you want

cameras 2 and 3 to start recording when

channel 1 detects motion, you would check

select those channels.

In addition, the user can set the sensitivity of certain areas within the ﬁeld of view by selecting

the Area setting for the respective camera.

Speciﬁc areas can be made sensitive by

applying a blue grid to the desired section of

the screen. The blue grid can be applied to

the entire screen – signifying that the entire

ﬁeld of view is sensitive - by clicking on

the star button. The trash can button will

remove the grid completely. Click and drag

with the mouse on the screen to draw or

erase the grid in select areas.

As sensitivity is inﬂuenced by color and light

level, you can adjust its values according to

your speciﬁc conditions. The default value is

“4.” A setting of “8” is most sensitive while a

setting of “1” is minimally sensitive.

VIDEO LOSS

In the event that signal is lost by one camera, others can be activated to record while

additional devices can also be triggered.

Click on the icon showing a silhouette of a

person and an illustration of a walking ﬁgure

will appear on the screen. Test your settings

by dragging the ﬁgure across the blue grid to

see if the sensitivity value and motion area are

suitable to current conditions. If they are, click

the o icon to save before exiting using the X

button.

Right-clicking in the screen will show or hide

the menu at the bottom of the screen.

Schedule Tab

This is also set to be on all the time by default and it can be adjusted in the same manner as

the Schedule conﬁguration in SECTION 4.4.

PICTURE 4-30

PICTURE 4-31

PICTURE 4-32

PICTURE 4-33

Like the Trigger tab in the Alarm Handling

section of the Sensor menu, you can select

the events that you wish to occur in the

event that a video input is lost. Both Alarms

and PTZ events can be scheduled as in the

Sensor menu above.

OTHER ALARM

In this menu you can set the DVR to alert you to a full Hard Drive, IP Conﬂict on the network or

a Disconnection.

You can set the response as well as at what

threshold of remaining disk space you wish to

be alerted.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 49 50

Comentarios a estos manuales

Sin comentarios

Q-See QT528 Manual de usuario Pagina 12

Comentarios a estos manuales

Relacionado con productos y manuales para Grabadores de vídeo digital (dvr) Q-See QT528