Q-See QT528 Manual de usuario descargar pdf (Pagina 6)

10 11

CHAPTER 3 BASIC FUNCTIONS

3.1 POWER ON/OFF

Before turning on the DVR, ensure that all connections are good.

POWER ON

Connect the power supply and the DVR will power up. The blue LED power indicator on the

front will illuminate and an on-screen WIZARD dialogue box will open allowing the user to set

up the time and time zone.

BASIC FUNCTIONS

CHAPTER 3

If the DVR displays the live image or doesn’t display the menu on start up, the menu can

be brought up by pressing the ESC button on the DVR or the MENU button on the remote

control.

POWER OFF

The DVR will power down to a standby mode when the POWER button on the remote control

is pressed, or when the SYSTEM SHUT DOWN icon is selected from within the MENU. In

both cases, the SHUT DOWN window will appear and users must select OK to conﬁrm. The

hard drive will stop spinning and the system will shut down. For extended periods of inactivity,

it is recommended that the DVR be disconnected from power either by turning off the power

at the surge protector or unplugging the device.

PICTURE 3-1

3.2 LIVE VIEWING AND RECORDING

The normal mode of the DVR is to display the live feed from the cameras. Conﬁguring which

channels will be displayed, naming the cameras and other display settings will be covered in

SECTION 4.3.

In addition to the camera images, the DVR will display symbols regarding the status of each

camera.

PICTURE 3-2

Symbol Meaning Symbol Meaning

Recording Manually or on Schedule Alarm Recording

Motion Detection Recording

Motion Event

1 2 3 4 5 6 7 8 9 10 11 ... 49 50

Sin comentarios

Q-See QT528 Manual de usuario Pagina 6