Q-See QT528 Manual de usuario descargar pdf (Pagina 8)

14 15

CHAPTER 4 MAIN MENU SETUP

MAIN MENU

Selecting the MENU icon on the left of the CONTROL BAR or pressing the MENU button on

the DVR and remote control open the MAIN MENU.

PICTURE 4-4

PICTURE 4-6

Clicking on any icon will open the relevant

menu.

SETUP

From the SETUP menu select the BASIC

menu to set device name, date, time and

other settings. There are three tabs covering

System, Date & Time and Daylight

Savings Time (DST).

SETUP

System Tab

The following settings can be changed in this menu:

Device Name: This will display on the client

end or CMS. Naming the device will

help users recognize the device when

monitoring remotely.

Device ID: If you have multiple systems, you

can give this device a numerical ID.

Video Format: Select between NTSC (North

America) or PAL (Europe) video

standards.

Password Check: By enabling this, a

user will need to enter name

and password when performing

conﬁguration operations.

Show Time: Displays time in Live View

Show Wizard: If this is enabled, a window

to reset time and time zone will open

upon system restart.

Max Network Users: Set the maximum

number of network connections - up

to 10.

PICTURE 4-5

DST Tab

Allows your system to adjust for time changes due to Daylight Savings Time.

VGA Resolution: Chose the conﬁguration that best ﬁts your monitor. Options are:

VGA800*600, VGA1204*768, VGA1280x1024 and CVBS. NOTE: VGA is for VGA

monitors while CVBS is for TV monitors connected using a BNC/RCA adaptor.

Switching between VGA and CVBS will change the menu output mode. Please be

sure to have the correct monitor on hand when changing output mode.

Language: Select your preferred menu language.

PICTURE 4-7

PICTURE 4-8

NOTE! When conﬁguring your settings, you will always need to click Apply

to save your current settings before closing the window with Exit otherwise

your changes will be lost. You may click Exit or the close window box (X) in

the upper right of the window to close without saving changes but an alert will

pop up asking if you wish to save changes or not. Click OK to save changes

or Cancel to continue without saving.You may select the Default button to

restore your settings to those set at the factory.

IMPORTANT! After changing the Language or Video Format, the device will

need to be restarted.

Date & Time Tab

Set date, time, time format and related conﬁgurations in this menu.

NTP Server: Using Network Time Protocol

will keep your system’s clock current

by allowing it to occasionally receive

updates from the selected server.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 49 50

Comentarios a estos manuales

Sin comentarios

Q-See QT528 Manual de usuario Pagina 8

Comentarios a estos manuales

Relacionado con productos y manuales para Grabadores de vídeo digital (dvr) Q-See QT528